Jump to content

X-Plane General Aviation

488 files

  1. X-Plane 11.50+ Rees Spitfire Pup2Seat 1.0

    X-Plane 11.50+ Rees Spitfire Pup2Seat 1.0. This is a simple Plane Maker prototype for a new two seat version of the well-loved JJ & Rees Spitfire Pup: JJ_AND_REES_SPITFIRE_PUP.ZIP. It is a fast aerobat averaging 250 mph and is easy to fly, due to it having a larger more stable airframe. It is a great aerobatic training aircraft, having full controls, and full instruments, at both front and back tandem seats. The engine is a Lycoming air-cooled flat 8-cylinder of 400 hp. By Clive Rees.

    18 downloads

       (0 reviews)

    0 comments

    Submitted

  2. X-Plane 11.50+ Rees Twinfire 1.0

    X-Plane 11.50+ Rees Twinfire 1.0. The Rees Twinfire has two engines, and four seats, and is fully aerobatic. It uses wing shapes from the Supermarine Spitfire. The engines are Lycoming 8-cylinder air-cooled of 400hp, giving it an average speed of 250mph. Front seats are occupied by pilot and co-pilot. Both have full controls and full instruments. Two back seats are for passengers. It is actually very easy to takeoff, fly as an aerobat, and land safely. The engine sounds of the Twinfire have been edited in stereo, from start-up to normal running, to single engine failure. Slightly different engines are heard left and right, creating a full 3D soundscape, with a charismatic twin engine throb. This first version was designed as the complete best flight behaviour model in Plane Maker. It has a slightly rough appearance, with a 2D instrument panel. Please use X-Plane's forward with 2D panel (alt + w). By Clive Rees.

    21 downloads

       (0 reviews)

    0 comments

    Submitted

  3. X-Plane 11.50+ Rees Tweety Mk2 1.0

    X-Plane 11.50+ Rees Tweety Mk2 1.0. This is Mk2 of the exciting Rees Tweety aerobatic biplane. Higher powered; faster; more refined handling. Mk2 is actually easier to take-off, fly, and land. Powered by a Rotec R3600 9-cylinder radial engine of 150 HP. Good for 170 mph sea-level. Available with a wide choice of sixteen livery colours. Cockpit is 2D. Use inside view forward with 2D panel. Exterior model is the full final Plane Maker flight model. A future more detailed, 3D rendered, version is likely. It will have smoother curves on the body and wings. Also, a lot more detail inside the cockpit. However, this version provides the full flight model, and the full dynamic flying experience. By Clive Rees.

    34 downloads

       (0 reviews)

    0 comments

    Submitted

  4. X-Plane 11 JJ And Rees Spitfire Pup 2.0

    X-Plane 11 JJ And Rees Spitfire Pup 2.0. In collaboration with Clive Rees, I release the JJ and Rees Spitfire Pup! Clive designed this aircraft in 2021 based on the 1936 Supermarine Spitfire. The Pup is an agile aerobat based on one of the greatest fighters of World War 2. From the sleek lines to the iconic elliptical wing planform, the Pup takes the best of the Spitfire and takes it to the extreme, without troublesome ground handling or difficult forward visibility. Built with modern construction techniques, and without all of the heavy armament, the Pup delivers ease of handling, crisp roll rates, and great visibility. The Pup is easy to land—the pilot sits high in the cockpit with excellent forward visibility on taxi, takeoff, and landing, and handling is a breeze (for a taildragger!). The Pup is a perfect airplane to explore aerobatic flight and air racing. With top speeds well in excess of 200 mph, the Pup will satisfy your need for speed, and can slow down and land with ease. All 3D and animation work done by A-Pilot, all flight characteristics, Plane Maker physics, and design done by Clive Rees. Paints designed by both. Released with permission of and in collaboration with Clive Rees. Please read the included PDF manual for a basic overview and checklist. Have fun! Jennifer Kimball (A-Pilot). By Jennifer Kimball and Clive Rees.

    93 downloads

       (0 reviews)

    0 comments

    Submitted

  5. X-Plane 11 J-3 Cub Package 2.0

    X-Plane 11 J-3 Cub Package 2.0. This is the Piper J3 Cub package for X-Plane 11. Updates include more detailed textures, lightning, some normal maps on the fuselage, and flight model/performance tweaks to maximise cub-ness for your X-Plane 11 experience. Thanks to Adrian (awall86) for the awesome gauges! Thanks also to Antonio (afnavarro) for his work with the prop, some of the normals, and the pilot figure! Note: I am aware of some minor issues with the mag switch going back to 'both' from 'off' and is trying to fix it. The float version has an 85 hp engine instead of the 65 so you can actually get it off the water. Enjoy the fun of your very own J-3! Version 2.0: special thanks to ArcticPilot for making these normals. By Jennifer Kimball (A-Pilot).

    194 downloads

       (0 reviews)

    0 comments

    Submitted

  6. X-Plane 11 Cirrus SR22 EC-KOJ 1.0

    X-Plane 11 Cirrus SR22 EC-KOJ 1.0. This is a repaint for the payware Carenado Cirrus SR-22. It represents a Spanish registered EC-KOJ. Note: this livery is based on the default Carenado N6693C paint. To install, unzip the downloaded folder and drag the file "EC-KOJ" into the "Liveries" folder of your Carenado SR22. By Antonio Navarro.

    77 downloads

       (0 reviews)

    0 comments

    Submitted

  7. X-Plane 11 Servicios Aereos Especiales SAE Piper PA-34 Seneca

    X-Plane 11 Servicios Aereos Especiales SAE Piper PA-34 Seneca. This aircraft, registered HK-4850 and christened Salvatore, is currently serving as air ambulance for SAE mostly from Villavicencio in their deep jungle runs picking up patients for urgent treatment in major medical facilities, High definition textures only for the payware Carenado Piper Seneca model. By Rodolfo Estrella.

    86 downloads

       (0 reviews)

    0 comments

    Submitted

  8. X-Plane Piper PA22 G-ARDT 1.0

    X-Plane Piper PA22 G-ARDT 1.0. This is a special request from one of our community members for a G-ARDT Piper PA22 Pacer livery. The aircraft operated from Lerwick Tingwall airport (EGET) in the north of Scotland and our member had flown in it. Unfortunately, on the 18th of May 2008, the aircraft was on approach at Northside, 5 miles SW of Aberdeen when pilot error caused it to crash. The aircraft touched down, ran into obstacles and sustained substantial damage. Our member recalls the aircraft which was subsequently scrapped and so asked me to repaint it for the Alabeo PA22. Simply unzip and place the newly created folder into the liveries directory of the aircraft. By Paul Mort.

    62 downloads

       (0 reviews)

    0 comments

    Submitted

  9. X-Plane 11.50+ RV-12 Version 1

    X-Plane 11.50+ RV-12 Version 1. This is version 1 of of a Van's Aircraft RV-12 light sport, homebuilt aircraft. The Van's RV12 is an American two-seat, single-engine, low-wing homebuilt airplane eligible for the U.S. E-LSA category, sold in kit form and as a complete ready-to-fly aircraft by Van's Aircraft of Aurora, Oregon. The RV-12 had its first flight on November 9, 2006. This X-Plane model is still a work in progress. Please see the included documentation for further details. Feedback and suggestions welcome. By Matt Fuller.

    218 downloads

       (0 reviews)

    1 comment

    Submitted

  10. X-Plane 11 RV-12 Paint Kit

    X-Plane 11 RV-12 Paint Kit. This is a paint kit for the Van's Aircraft RV-12: RV-12_V1.ZIP. The included files are in .xcf format and 4K resolution. By Matt Fuller.

    37 downloads

       (0 reviews)

    0 comments

    Submitted

  11. X-Plane Scottish Wings Cherokee 140 G-SWXJ 2.0

    X-Plane Scottish Wings Cherokee 140 G-SWXJ 2.0. The Cherokee 140 is a real pleasure to fly so I decided to give it the new Scottish Wings lick of paint. Many thanks to the vFlyteAir team for giving me permission to modify one of their original textures, lovely job folks. Download, unzip and place in the livery folder. Please remove any older versions to prevent conflicts. By Stuart McGregor.

    70 downloads

       (0 reviews)

    0 comments

    Submitted

  12. X-Plane Default Aerolite 103 Scottish Wings (G-SWXM) 1.0

    X-Plane Default Aerolite 103 Scottish Wings (G-SWXM) 1.0. This is a livery for the default Aerolite 103. Download, unzip and place in the livery folder. You might want to try out a wee trip from Longside: EGPS_LONGSIDE_3_3.ZIP. By Stuart McGregor.

    35 downloads

       (0 reviews)

    0 comments

    Submitted

  13. X-Plane Socata TB-10 EC-JDZ 1.1

    X-Plane Socata TB-10 EC-JDZ 1.1. This is a livery for the Socata TB10 by Just Flight. It represents a Spanish registered aircraft EC-JDZ, flying for Dream Flyers School (Sabadell, Spain). Unzip the downloaded folder and copy the livery EC-JDZ_TB10 into the liveries folder of the aircraft. By Antonio Navarro.

    62 downloads

       (0 reviews)

    0 comments

    Submitted

  14. X-Plane Harbour Air DHC-3 Otter C-FSUB 1.0

    X-Plane Harbour Air DHC-3 Otter C-FSUB 1.0. This repaint is for the RW Designs single piston Otter. C-FSUB wore many liveries in its day as a piston Otter. First starting out as production number 2 for the RCAF, the aircraft was then sold through many Pacific north-western airlines until it was bought by Harbour Air around the 1990's. There were a few versions of the Harbour Air classic scheme. The one I have tried to replicate is the first iteration after Harbour Air purchased the aircraft. I have seen many images of the airplane on straight floats and wheels under the Harbour Air livery. The aircraft then flew for Air Mont-Laurier until it was brought back to the west coast to be fitted with the turbo conversion. Note, this livery is not perfect and will be update with new PBR and potentially floats in the future. By Canada4XPlane.

    76 downloads

       (0 reviews)

    0 comments

    Submitted

  15. X-Plane 11 Cessna 172SP

    X-Plane 11 Cessna 172SP "LNFAG" 1.0. This is a livery for the default Cessna C172M Skyhawk. This is one of four planes belonging to the Orsta and Volda Aero Club (ENOV). To install: place the folder "ln-" into the following location: X-Plane 11\Aircraft\Laminar Research\Cessna 172SP\liveries. Documentation includes a real in use checklist (PDF). By Tom Knudsen

    46 downloads

       (0 reviews)

    0 comments

    Submitted

  16. X-Plane 11.50+ Globe Swift CG-1B 1.0.1

    X-Plane 11.50+ Globe Swift CG-1B 1.0.1. The Globe GC-1 Swift, also known as the Globe/Temco Swift, is a light, two-seat sport monoplane from the post-World War II period. The Swift was designed by R.S. "Pop" Johnson in 1940. Credit goes to Beber for the use of his pilot. By Philippe Gastebois.

    138 downloads

       (0 reviews)

    0 comments

    Submitted

  17. X-Plane 11 Scottish-Wings King Air C90B (New) 2.0

    X-Plane 11 Scottish-Wings King Air C90B (New) 2.0. This is a new and updated version of the Scottish-Wings livery. To install, download, unzip and place in the livery folder. There is a second file provided which will allow you to change the registration in the cockpit. To use it (C90B_cockpit.png) down load, unzip and place in the main aircraft folder, the one where the .acf file lives. This will overwrite the original and will change the registration in all liveries. Important: backup the original file first. Any issues please let me know. Version 2.0 includes a new logo. By Stuart McGregor.

    46 downloads

       (0 reviews)

    0 comments

    Submitted

  18. X-Plane 11 Scottish-Wings Beechcraft Baron 58 2.0

    X-Plane 11 Scottish-Wings Beechcraft Baron 58 2.0. This is a new and updated version of the Scottish-Wings livery. To install, download, unzip and place in the livery folder. There is a second file provided which will allow you to change the registration in the cockpit. To use it (Baron_58_cockpit.png) down load, unzip and place in the main aircraft folder, the one where the .acf file lives. This will overwrite the original and will change the registration in all liveries. Important: backup the original file first. Any issues please let me know. Version 2.0 includes a new logo. By Stuart McGregor.

    48 downloads

       (0 reviews)

    0 comments

    Submitted

  19. X-Plane Executive Club Gold King Air C90B 1.1

    X-Plane Executive Club Gold King Air C90B 1.1. This is a completely fictitious livery for the default King Air C90. To install, download, unzip and place in the livery folder. By Paul Mort.

    27 downloads

       (0 reviews)

    0 comments

    Submitted

  20. X-Plane 11.52 Piaggio P-180 Avanti Glass Cockpit

    X-Plane 11.52 Piaggio P-180 Avanti Glass Cockpit. Piaggio P-180 Avanti glass cockpit based on XP9 external model by Jrollon (Ferrari team livery) converted to XP11 by Sean McLeod (Aerostarsim); Robert Pearson (aerodynamics); Massimo Durando (analog cockpit & 3D cockpit). Glass Cockpit 3D rework by Marco Spada.

    199 downloads

       (0 reviews)

    0 comments

    Submitted

  21. X-Plane DA40 (9M-SWX) 1.0

    X-Plane DA40 (9M-SWX) 1.0. This is a livery for the Alabeo DA40. I saw a couple of these doing some circuits on a holiday and couldn't resist coming up with a fictional livery of my own. Well really just the addition of a fictitious Malaysian tail number and flag to have fun with. If you want something more modern to scoot about in, you can't go wrong with the DA40 from Alabeo. Many thanks to the Alabeo team for allowing modifications to their original textures, lovely job folks and all credit to them. If you don't have this aircraft it is well worth considering. To install, download the file, unzip it and place "9M-SWX" in the "liveries" folder of the aircraft. By Stuart McGregor.

    53 downloads

       (0 reviews)

    0 comments

    Submitted

  22. X-Plane Default Stinson L5 (G-CGYG) 1.0

    X-Plane Default Stinson L5 (G-CGYG) 1.0. This is a livery for the default Stinson L5. To install, download the file, unzip the folder and place the newly created 'G-CGYG' folder into the liveries directory of the default Stinson. By Stuart McGregor.

    58 downloads

       (0 reviews)

    0 comments

    Submitted

  23. X-Plane Beechcraft Baron B58 (G-OCHI) 1.0

    X-Plane Beechcraft Baron B58 (G-OCHI) 1.0. This is a livery for the Beechcraft Baron B58 by Carenado. To install, download the file, unzip it and place the livery folder in the main livery folder of the Baron. By Stuart McGregor.

    23 downloads

       (0 reviews)

    0 comments

    Submitted

  24. X-Plane 11 Jaguar Special Edition (Blue) B58 Baron 1.0

    X-Plane 11 Jaguar Special Edition (Blue) B58 Baron 1.0. This is a livery for the default X-Plane B58 Baron and is loosely based on a South American Jaguar livery. Simply unzip and place the newly created folder into the liveries directory of the aircraft. By Paul Mort.

    48 downloads

       (0 reviews)

    2 comments

    Submitted

  25. X-Plane 11 Jaguar Special Edition (Red) B58 Baron 1.0

    X-Plane 11 Jaguar Special Edition (Red) B58 Baron 1.0. This is a livery for the default X-Plane B58 Baron and is loosely based on a South American Jaguar livery. Simply unzip and place the newly created folder into the liveries directory of the aircraft. By Paul Mort.

    37 downloads

       (0 reviews)

    0 comments

    Submitted

×
×
  • Create New...